In den Warenkorb

Allen & Heath PA 12 CP Powermixer mit 2x500W/sin/4Ohm, 4 Aux Wege,
hochwertige Digitech Effektsektion, 100mm Fader, beleuchteter Mute Schalter,
PFL, 2 x 4-fach Parametrik EQ zuweisbar auf Aux oder Master, einzeln zuschaltbare 48V Phantomspeisung

-8 Mono Mikrofoneingänge 2 doppelt belegbare Stereo-Inputs
-einzeln zuschaltbare 48V Phantomspeisung
-4 Aux Wege
-Hochwertige Digitech Effektsektion
-100mm Fader
-beleuchteter Mute Schalter
-PFL
-2x4-fach Parametrik EQ zuweisbar auf Aux oder Master
-2 x 500 Watt an 4 oder auch an 8 Ohm !!!

Mono Inputs:

8 [PA12-CP] or 16 [PA20-CP] mono channels with Mic [XLR] & Line
[TRS] inputs. Line input overrides the XLR input.
Individual 48V phantom power switches are provided. New padless two-stage
preamp with smooth gain law. Line input
goes to second stage for better matching and performance. Switched 100Hz
high pass filter. Insert point. 4 band EQ.
4 aux mixes. Mute with LED. PFL button with LED [functions as peak
indicator]. 100mm fader.

4 Band EQ:

Shelving LF [60Hz], and HF [12kHz]. Fixed LM [250Hz], and swept HM
[300Hz - 6kHz]. The fixed 250Hz control has been
carefully selected to provide reduction of muddy sounds and enhance
warmth

Dual Stereo Channels:

Two stereo channels with two unbalanced stereo inputs
on each. One is RCA one is TRS jack. Independent gain controls
provide source mixing in the channel strip. The top inputs [RCA] can be
switched direct to L&R instead of the channel strip
providing extra returns. Two band shelving EQ. 4 aux mixes. Stereo balance,
mute with LED, PFL with LED, and 100mm fader
as mono channels.

4 Auxiliary Sends:

From all channels: 2 pre-fade for foldback mixes - these
have 100mm fader masters, mute switch with LED, AFL with LED,
and TRS outputs [can be routed internally to output section]. 1 post-fade
aux mix for FX - this feeds the internal FX and
has a TRS jack output for external FX. 1 post-fade aux mix to TRS jack
output is provided for external FX or special feeds.

Mix Outputs:

Main stereo mix output has 100mm fader control & mute with LED.
TRS jack outputs. Mono sum output with level control
with switch for subwoofer mode to TRS jack. Record output [RCA] analogue
SPDIF switchable pre/post fader. Twin 12
segment LED bar meter shows program [or PFL /AFL]. Insert points on TRS jack
for external processing. Output EQ and
routing to internal amplifiers / external systems is provided.

Output EQ:

4 band semi-parametric EQ is provided in the output section, this
affects the TRS slave outputs, and the internal constant
power amplifiers. This offers more control than graphic equalisers for
precise management of speakers, especially foldback
/ monitors. Source selector allows output EQ section to be used on Left /
right, L&R sum / foldback1, or foldback1 /
foldback2.

Constant Power Amplifiers:

1kW i.e. 2 x 500W RMS peak power professional
class AB power amplifiers built in. Unique ALLEN&HEATH design gives
full output into 4 OR 8 ohms [rear switch selector]. Output is to locking
SpeakonTM connectors. Thermal management twin
fan system. Full protection - input limiter to prevent clipping, short
circuit protection, current limit and DC fault sensing.
LED indication of: signal presence, peak warning, speaker protect and
temperature. AB amp input TRS break-jacks
[normalised to output section / slave out jacks] allow independent use of
the power amplifiers if desired. Standby mode
switch puts amplifier into protect with speakers isolated.

Digital FX:

16 program digital FX processor provides reverbs, delays, chorus
and others, inc combined. This FX module takes its feed
from the post-fade FX aux on the mono & stereo channels. The output of the
FX module is controlled by a 100mm fader
with mute & PFL and is routed to the stereo mix and FB1&2 with post fade
level controls. At this point, 2 TRS inputs with
level control provide a way of combining external FX with the internal unit.
Internal FX unit can be switched off to use
external only if preferred. A footswitch TRS jack is provided to mute the FX
channel. Editing of FX can be done via MIDI
using ALLEN&HEATH software editor available free from resource CD or our
website.

Master Section:

Background music BGM mode - plays 2 track input into the main
mix post fader, allows user to pull down fader (whilst
patching, taking a break, or during walk-in) and leave music playing through
the amplifiers / speakers. 2 track input [RCA]
with level control to L&R - feeds headphone monitor selector [checking
recording]. Twin, 3 colour 12 segment LED meter
displays active monitor source. Large LED indicates PFL / AFL active -
signal overrides L&R / 2TRK monitor source selection.
Standby switch uses relays to disconnect the speakers. 2 track output [RCA]
analogue SPDIF allows direct to digital
recording. Switchable pre / post master L&R fader. Mono sum out with level
[TRS] - mode switch to provide sub feed with
100Hz low pass filter. Phones out [TRS] with level.

PSU:

Solid & reliable internal PSU. 1600W design.

Lamp:

4-pin XLR socket